## class data.png - Section 1: Bell work

# Radian measure Day 2 of 2

Lesson 3 of 13

## Objective: SWBAT solve problems with angles describes in radian measure

## Big Idea: Through sharing of problem solving strategies students will develop a description for measuring angles in radians and use the relationship with degrees to find special angles.

*45 minutes*

#### Bell work

*10 min*

Today I begin by putting the class data from yesterday's lesson on the board. I ask the students to sit with their groups and to discuss the following prompt:

**Why is there so little variation in the data produced by each group?**

As my students are discussing this prompt, I circle and ask probing questions, such as, "What do you know about the circles each group constructed and measured?" I want students to make the connection to the concept of similarity. All circles are similar, therefore each sector made for a particular angle is similar to all of the others for that angle (i.e, corresponding parts of the sector are in the same ratio). Many of my students think of similarity when working with polygons, but are slower to apply the concept to circles. It may take some prompting on my part with questions; it is important to be patient at this stage in the lesson.

Once students generally agree that all of the sectors for a given angle are similar I ask:

**Why are the sectors similar?****What are we getting when we take the arc length and divide by the radius?**(I expect my students will say something about this is a scale factor of arc to radius.)**If you think about labels, what happens to the labels in your ratio?**

These questions lead the students to see the structure of the diagram in terms of a ratio, that yields a real number as a measurement.

*expand content*

#### Definition of radians

*10 min*

Once I sense that my students understand that the **arc length/radius** ratio for an angle will be the same for all circles, I define this ratio as **the measure of the angle in radians**. I explain that mathematicians this measurement is important because there are applications for arclength that require a measurement that is not dependent on the length of the radius.

As a next step, I ask the class to explain what a **1 radian measure** would mean. Another way of a starting this conversation is to ask, "In yesterday's activity, which angle was closest to 1 radian?"

As students worked on the activity yesterday, groups employed different methods for finding the length of the arc. It is helpful for students to discuss different methods, as it allows students to see different ways of thinking. It also helps groups to verify their strategies, if students ask questions about a group's method (**MP3**). To facilitate discussion I use the following questions:

**Did anyone only measure a few arcs and then use another method to finish the activity? Can you explain your process for the class**.**How many arcs must be measured to find all the answers for this activity?****Did a group think of a way to determine the length of the arc without measuring the angle? How did you do this.**

Now as a class, we determine the number of radians in 360 degrees. I explain that we want to do this without measuring or having a specific measure for r. I use r to represent the radius and generalize. The students simplify to get 2*pi. We look at our data and see that most students are close to 2pi. This is a good time to discussion precision.

**Why are the arc length in the class data not exactly 2*pi?** **Are there any groups who came up with exactly 2*pi? Why is that so?**

I expect that many of my students will realize that the tools used caused measurement error to occur. Some may state that they were not careful when they measured. When the students only measured once if the measurement was not close to the actual amount they increased the error as they went around the circle.

*expand content*

Once the class has found the a 360 degree angle is the same as a 2*pi radian angle. I ask the class to begin finding other angles such as 180 degree, 90 degree, 270 degree. I encourage students to explain their reasoning as they determine the radian measure.

**What other angles could you find using the information you already have?** Some students will find 45 degrees since it is half of 90 degrees and others will find 30 degrees.

**How many radians are in 50 degrees? ** The students are given 2-3 minutes to think and discuss a method with their groups. The different methods are shared with the class and analyzed. Students analyze the methods and ask questions about the methods.

The class does a few more conversions from degree's to radians before working the other way, finding the degrees when given the radian measure. Students work for 2-3 minutes then different methods are put on the board and student again analyze the processes used. Many students think all angles in radians have must have pi in the angle. To help students realize that angles can be a decimal I ask students to convert an angle that is a decimal. I usually get a question on whether this is really an angle. We discuss how using pi gives the exact answer but it is sometime better to have the angle in decimal form. The students develop a process to solve.

*expand content*

#### Closure

*5 min*

As class comes to an end I inform my students that I want them to know the equivalent radian measure of special angles 30, 45 and 60 degrees (along with their multiples). I say, "You should know these from memory, but, I would also like you to b able to convert from degrees to radians, and, from radians to degrees." Then each person is given the angle comparison worksheet. I assign this worksheet to be completed by the next day so we can use the information for the next lesson.

I also write two questions on the board for students to consider:

**Why did I put the angles together in this manner?****How is the first angle related to the other angles in the table?**

I expect my students will see the relationship between the angles in that the larger angles are multiplies of the acute angles. This will help students as we talk about reference angles and co-terminal angles later in the unit.

#### Resources

*expand content*

##### Similar Lessons

###### The Trigonometric Functions

*Favorites(7)*

*Resources(18)*

Environment: Suburban

###### Riding a Ferris Wheel - Day 2 of 2

*Favorites(5)*

*Resources(10)*

Environment: Suburban

###### Investigating Radians

*Favorites(8)*

*Resources(19)*

Environment: Urban

- UNIT 1: Introduction to Learning Mathematics
- UNIT 2: Functions and Piecewise Functions
- UNIT 3: Exponential and Logarithmic functions
- UNIT 4: Matrices
- UNIT 5: Conics
- UNIT 6: Solving Problems Involving Triangles
- UNIT 7: Trigonometry as a Real-Valued Functions
- UNIT 8: Graphing Trigonometric Functions
- UNIT 9: Trigonometric Identities
- UNIT 10: Solving Equations
- UNIT 11: Vectors and Complex Numbers
- UNIT 12: Parametric and Polar graphs and equations

- LESSON 1: Is John Guilty
- LESSON 2: Radian Measure Day 1 of 2
- LESSON 3: Radian measure Day 2 of 2
- LESSON 4: Coterminal and Reference Angles
- LESSON 5: Sine and Cosine Day 1 of 2
- LESSON 6: Sine and Cosine Day 2 of 2
- LESSON 7: Developing the Unit Circle
- LESSON 8: Evaluating Trigonometric Functions
- LESSON 9: Finding the angle when given the function value
- LESSON 10: How do you find the Inverse of a Trigonometric Functions
- LESSON 11: Using Inverses to Evaluate
- LESSON 12: Review of Trigonometric Functions as Real Valued Functions
- LESSON 13: Assessment of Trigonometric Functions as Real Valued Functions